Bandit 240 PB Manuel d'installation télécharger pdf (Page 22)

The PC-communication link is a tool every

BANDIT-installer has to use to have a data connection

between BANDIT and a computer with a standard COM

port (RS-232 SubD connector). To perform the software

settings as well as to read-out the log of the 240PB, you’ll

need this “Communication link”. It has to be plugged-in,

on one side in the fog generator to be set and read-out,

and at the other side into the computer.

On the back frame of the unit, you’ll find a female mini-jack connector mounted and

sunk-in. This extra protected, special input, has as feature to be the serial read-in and

read-out communication channel to a PC/laptop.

Green Led: Link on/off

This Led is on, the moment there is

communication, until 10 seconds after the

last communication signal.

If this Led blinks, both batteries have to be

replaced (Sony CR2430 or compatible).

Yellow Led: RS-232 communication-Led.

Blinks simultaneously with the

communication signals coming from the

PC/laptop. Blinks only when the chosen

COM-port of the PC/laptop is right set.

- 7 BS-software - ; option - comport ;

Fits to every PC/laptop (standard RS-232

/SubD9 connector).

Is compatible with the “old” 220 BANDIT-model.

Safe, disturbance free and galvanic separation

between fog generator and PC or laptop

(+2.000 Volt secured opto-coupled data split).

BS-software CD included in box or upgradeable

through: www. bandit.be

Sunk-in

mini-jack connector

Communication Link

Frontpannel Communication Link.

BANDIT 240 PB v.408

p.21 Inputs - Communication Link

Lap op

BS- of e

twar

- Batteries included and

mounted ready to go.

- 2 spare batteries added

in the box.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 46 47

Commentaires sur ces manuels

Pas de commentaire

Bandit 240 PB Manuel d'installation Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Machine à brouillard Bandit 240 PB