Bandit 240 PB Manuel d'installation télécharger pdf (Page 33)

p. 32 - Communication status - LEDs - Front LEDs

COMMUNICATION STATUS

The unit gives following visual and audio information to its immediate surroundings:

FRONT LEDs:

On the BANDIT-front

you’ll find six LEDs.

Through these LEDs

you can easily see

what mode (status) the

unit is in and if there

are any failures

reported.

N Available (OK)

If BANDIT is not in guard mode:

- This green LED is lit when:

a) there is no internal failure detected

b) the unit is on its required temperature (temperature high enough to be operational,

and to perform a fog ejection).

Practically, this means: as long as the green LED is on, the unit is ready.

- This green LED blinks if:

a) no internal failure is detected, and

b) the unit is warming up. As soon as it gets its required temperature, it will be ready to

perform a fog ejection. If the mains power supply is present, the unit needs

approximately 50 minutes (from cold condition) to reach its target temperature.

If BANDIT is in guard mode:

This green LED will be on. This way the unit will never reveal through its front panel the

possibility of not being ready.

One of the tasks of the integrated “Power Saver” is to take care that the temperature

of the heat exchanger will not raise higher than necessary to produce the adjusted fog

quantity. The temperature of the heat exchanger for a fog ejection adjustment of for

example 5 seconds, is 50°F lower than for an adjusted fog ejection of 15 seconds. So if

you change the fog ejection volume, automatically you’ll also change the temperature

of the heat exchanger. If there is enough difference between the ‘old and lower’ ejection

period and the ‘new and longer’ one, the green LED will start blinking to show that the

unit has not reached its new higher temperature yet.

Guard

Alarm

Failure

HY-3

Power ?

BANDIT

Ejection nozzle

BANDIT 240 PB v.408

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 46 47

Commentaires sur ces manuels

Pas de commentaire

Bandit 240 PB Manuel d'installation Page 33

Commentaires sur ces manuels

Produits connexes et manuels pour Machine à brouillard Bandit 240 PB